Ener.co – Products
Ener.co has a diverse array of products focused on both energy efficiency and preventing corrosion of industrial-sized a/c units. From our original polyurethane Enercoat®, we have expanded to include three water-based versions of our proprietary coating: Enercoat® WB – Black, Enercoat® WB – White and Enercoat® WB Antimicrobial. We realized during the coronavirus pandemic, that it is also necessary to treat the entire HVAC system so we developed Enerfoam® to clean and disinfect coils throughout your cooling system. Odorlesss and quick drying, Enerfoam® ensures a better air quality devoid of pathogens. Our latest two products deal with maintaining temperatures inside of buildings by coating both the exterior (roof) and interior with Enerflex®, which provides an added degree of energy conservation by aiding in the maintenance of a consistent temperature with minimal heat loss.
Our full product line is as follows:
- Enercoat® Thermally Conductive Moisture Curing Polyurethane – SDS can be found here, PDS here
- Enercoat® WB Antimicrobial – SDS & PDS
- Enercoat® WB – Black – SDS & PDS
- Enercoat® WB – White – SDS & PDS
- Enerflex® Interior & Exterior – SDS & PDS
- Enerfoam® – SDS & PDS
Our Products = Energy Savings
Why It’s Important
Air-cooled heat exchangers lie at the heart of the energy efficiency of air conditioning systems. Weather, environmental conditions, dirt and debris are constantly damaging outdoor cooling equipment. Enercoat® protects the surface of heat exchanger coils to prevent this damage from occurring.
Untreated coils begin to corrode from the first day they are exposed to the elements. There is an estimated 3 – 5% loss in efficiency per year due to corrosion.
“This means that in just 10 years exposure to the elements can impair thermal performance in a coil by 30% to 50%. With the average lifespan of air-cooled units in the U.S. is 21.5 years. This means that a significant portion of the cooling capacity has been lost by that time.”
Traditional coatings aim to create a smooth fin-tube surface that accumulates less debris over time and protect against corrosion. However, traditional coatings can impair heat exchanger performance . These coatings possess low levels of conductivity, transfer less heat, and negatively impact energy efficiency. They are also susceptible to tears and cracking, which leaves gaps at the point of the fin-to-tube bond or unfinished edges where fins are cut during the manufacturing process.
Our products address all of these issues by:
- Inhibiting causes of fouling and the adhesion of dust and grime to coils
- Decreasing power consumption
- Increasing cooling capacity
- Optimizing compressor operation; reduces stop/start cycles; extends compressor life.
- Extending overall equipment life, deferring capital investment in new a/c units
Would you like a demo or more information? Let’s get started.
Hear from our clients
We value a collaborative relationship with our customers, empowering them to become educated consumers. Here is some insight from our clients who have achieved a significant savings in their energy consumption and costs.
Our company has been providing software enabled M&V solutions for energy efficiency technology companies for many years now, and I've seen an enormous amount of "before" and "after" data from energy efficiency projects. As Ener.co®'s M&V partner, I can say that Ener.co® treatments consistently produce strong improvements in efficiency and savings for their clients' facilities.
Ener.co® treated two of the oldest and worst performing units we had - and the results were remarkable. They allowed us to defer having to replace the units for three and a half years. Ener.co® proved to be a no fuss, low cost solution to our very serious problem.
With Ener.co we saved ourselves about $120,000 in capital expense by treating instead of replacing the coils and saw reduction in energy consumption of 16.7%.